All rights reserved - SPM Thermo-Shield © Site by  Cybernetic Web Design

Home About Us Products Find a Distributor Info / Testing Photo / Video Contact Alert !
Protected by Copyscape Web Plagiarism Checker

THERMO-SHIELD ®   METAL PRIMER

METAL PRIMER

DESCRIPTION
Thermo-Shield® Metal Primer is rust inhibitive, water-based, high quality, 100% acrylic
resin, corrosion resistant coating.
















TYPICAL USES
It is used as a Primer / Base Coat on all rusty metal tanks & pipelines, water tanks, silos,
storage bins, metal roofs, beams etc., surfaces, prior to the application of Thermo-Shield®
Roof Coat or Tank Shield.

SURFACE PREPARATION
Good cleaning of the metal must precede the Metal primer application. Surface must be
cleaned of grease, oil, dirt and loose rust with a power sander or grinder, or wire brushing.

ADHESION
Very good to steel and iron surfaces, becomes part of the piece that is painted.

APPLICATION
Apply with brush, roller, or airless spray equipment.

THEORETICAL COVERAGE
14 – 23 m2 / Gallon (150 – 250 sf / Gallon) - per coat
3.7- 6.0 m2 / Liter - per coat
*Minimum of 2 coats required

DRYING TIME
4 hours to touch (77 F & 50% relative humidity) 24 hours to re-coat.

PACKAGING
5 gallon pails and Lined 55 gallon drums.

PRODUCT DATA
Solvent: Water
Flash Point: Non-Flammable (water based) DO NOT FREEZE
Percent Volatile by Volume: 62%
Weight by Gallon: 10.65 Lbs
V.O.C.: 0.31 Lbs/Gallon

PRODUCT CODE
METAL PRIMER: 5980
Top of Page
#
Green Products